What should be paid attention to use the automatic electromagnetic roasting machine?

 Attentions during the operation of the electromagnetic roasting machine:

1. After the machine  arriving , place it steady, check the gearbox and add engine oil.

2. For your life safety, please connect the ground wire, check whether the voltage is normal, otherwise the machine will be easy to burn out the motor.

3. Turn on the two direction switch to test that if the machine works well , and then turn on the heat swith to adjust temperature.

4. Materials in waiting

5. After ignition, add a certain amount of refined salt or clean sand, heat  to about 50 degrees centigrade, then put material into drum, roast until the material turn yellow according to your experience.

6 When everything is ok,turn the two direction switch from "clockwise" to "stop", waiting for two seconds, and then turn the swith from "stop" to "anticlockwise", if not,the motor is easy to burn  and the material can not be poured out.

7. When finshed, do not stop immediately, let the machine continue to rotate for 20 minutes , otherwise the machine temperature is too high, easy to produce deformation, affect your use.

Contact person: Bruce, email: bruce@chikemachine.com, Whatsapp: +86 15303992566